Sunday, April 4, 2010

AFTER

before

Thursday, March 4, 2010

Business Card


front view card

back view card




method:-

FRONT VIEW OF THE CARD

1)Download image 1, image 2, image 3. You will get this images.

2)Press ctrl+n, set the width >2.25 and height>3.75 inches. Also, change the resolution to 300 and name it as Business Card.

3)Press ctrl+0 to open all the image that you download just now. Drag the images to Business Card layer.

4)Make sure you arrange the layer in order that is image2, image1 and image 3. Set the layer of image 1 to normal, image 2 to hard light and image 3 to hard light.

5)Press>layer>flatten image.

6)Go to layer box and double click on background layer so that the layer will be unlock.

7)Go to tool box>choose brush or you press B button on keyboard for shortcut.

8)Set the foreground colour to d06005.

9)Choose lines 7 brush type and set the meter diameter to 1399px and place it on Business Card layer. Next, choose lines 3> set the meter diameter to >1242 and place it on Business Card layer.

10)You will get as image below.

11)Now time to create text. Press ctrl+n and name it as create text.

12)The text that we are going to create is uchoose@creative.com, 03-87654564

13)Press T> choose any kind of text type you want to> set the size to 9 pt>Set the text colour to d06005. Type uchoose@creative.com and rotate it 90 degrees anti-clockwise.

14)Press B to open brush tool. Select sample brush 3 brush type and set the master diameter to 288px and make sure the mode is soft light.

15)Place the brush on the text.

16)Rotate back the text tp 90 degrees clockwise.

17)Repeat the 13,14.15,16 step for 03-87654564 text.

18)Drag both text to Business Card layer and arrange them as image below.

19)Set the background colour to d06005. Press ctrl+n to open new layer. Name as Background Colour. Set the background content to background colour and press OK.

20)Press M to open Rectangular Marquee Tool. Set style>fixed size ,width>100px and height>34px and clck it on Background Colour layer

21)Drag it to Business Card layer and place it on top of the uchoose@creative.com.

22)Set the opacity to 59% and fill to 52%. On it create text TG SYAZWANI. With font> roxwell>size>12pt.

23)Now press U to open Line Tool. Create horizontal line below TG SYAZWANI text.

24)Right-click on line layer and click blending option. Tick on the stroke. Set the colour to white.

25)Press T to open text tool and write creative director. Choose font > Viner Hand ITC , size>9 pt and white font colour.

26)Place the text below the horizontal line. You will get as image below:-

27)Press B to open brush tool and choose shower splatter brush with master diameter 411 and in normal mode. Before that make sure you set the foreground colour to dull pink or any colour you want to. Place it on TG SYAZWANI text.

28)Now we are going to create wedesign.youchoose. text. Press T to open text tool. Choose any font you love to, set the size to 9pt. For "we and you" text choose black colour and for "design and choose" text choose colour d06005 and for "." chose light purple colour. Place the text between line 3 and line 7 brush.

29)Select layer 0 in the layer box. Press B to open Brush tool. Choose brush tiza_rooted20 brush with master diameter 405 and mode soft light. Make sure the foreground colour is set to white.

30)Place it on wedesign.youchoose. text. you will get this image. And the front of the card is done! :)


BACK VIEW OF THE CARD.

1)Repeat 1 to 6 steps of the front view card. But name the layer as Back layer.

2)Copy wedesign.youchoose. text by pressing ctrl+c and paste it on Back layer by pressing ctrl+v.

3)Place the text in the middle.

4)Press B to open brush tool. Choose footprints brushes, setthe master diameter to 216 px and mode is normal. Before that make sure you set the Foreground Colour to white.

5)Place it on wedesign.youchoose text.

6)Choose one more brush that is tiza_rooted17 with master diameter 1242 and set normal mode and place it below text.

7)We are done! :)

Friday, February 26, 2010


Beberapa hari ini, aku cubalah explore photoshop dengan lebih mendalam dengan tengok video kat youtube. Dah macam2 video aku download and tryy nk edit pic dengan menggunakan technique which is called as POLAROID MONTAGE. Teknik ni takde lah susah sangat. maybe bila korang da tengok video tu sekali jer kott da boley buat. Tapi aku beberapa kali jugak laaa. hee -.-", so this is the image that i had used to edit using polaroid montage technique.

and this is the result.


#for those who want to try this technique, this is the video for your reference. Have fun! :)


editing words using photoshop



Monday, February 8, 2010

Multimedia Poster.

(a)

(b)

(c)

(d)
(e)

(f)

(g)

(h)
(i)


Result


it's our time to take care of the earth, save the earth.


THEME :-

Save the earth.

TECHNIQUE :-

1. Using adobe photoshop CS4 , open new file with height and width of 30cm and name it as poster.
2. Download picture above (e, f, g ,h ,i )
3. Click File > Open > picture e.
4. Repeat the same step ( step 3) for picture f,g,h and i.
5. Click File > New > background with colour as picture a.
6. Repeat the same step for picture b,c,d.
7. Drag the picture e,f,g,h,i into the poster layer using move tool and arrange as the result above.
8. Adjust the picture size until you get the suitable size and using magic wand tool remove the unwanted figure in the picture.
9. click layer>flatten image.
10. Using eleptical marque tool create a circle in the poster layer. Right click and select inverse.
11. Click Layer > New Adjustment Layer >Levels. Adjust the levels as you want to.
12. Next, click layer > new adjustment layer> curves. Adjust the curves as you want to.
13. Save the file.

Tuesday, February 2, 2010

Fun with CS4


before


after

before

Align Center
after

Thursday, January 28, 2010

TASK 2 ADDIE (IMPLEMENTATION) - 29.1.2010



The Implementation phase

Implementation is the fourth phase from the ADDIE model.
This is the phase where the developed course is actually administered to the target audience. The delivery environment should be prepared for implementation of the course. The following considerations are also taken into account during this phase.
Planning for implementation is important. After all the analysis, design and development the team has done so far it would be terrible if the instruction or project fails due to poor implementation.



During the implementation phase, a procedure for training the facilitators and the learners is developed. The facilitators' training should cover the course curriculum, learning outcomes, method of delivery, and testing procedures. Preparation of the learners includes training them on new tools (software or hardware) and student registration.
This is also the phase where the project manager ensures that the books, hands-on equipment, tools, CD-ROMs and software are in place, and that the learning application or website is functional.

Here are just a few of the implementation issues that the delivery team will need to decide.

-Establish the timetable for the course rollout
-Schedule the courses, enroll learners, and reserve on-site and off-site classrooms
-Notify learners and their supervisors about the course
-Select trainers and prepare them with a custom train-the-trainer
-Arrange for the printer to deliver course workbooks to the class site
-Ensure all sites will have internet-ready computers and arrange for laptops to be shipped when necessary
-Manage travel and expenses for the trainers and/or learners


http://www.outsource2india.com/LearningSolutions/articles/ADDIE.asp
http://interconnect.tamucc.edu/implement/implement.php

Tuesday, January 26, 2010

Role as Listener in project management group.

What is mean by listener?
  • to give attention with the ear; attend closely for the purpose of hearing; give ear.
  • to pay attention; heed; obey (often fol. by to): Children don't always listen to their parents
  • to wait attentively for a sound (usually fol. by for): to listen for sounds of their return
  • Informal. to convey a particular impression to the hearer; sound: The new recording doesn't listen as well as the old one.
#reference : http://dictionary.reference.com/browse/listener

How to be a good listener?

  1. Learn to listen by using lots of eye contact:
    Let the speaker know that you are interested in what is being said
  2. Be slow to speak:
    Sometimes, people speak to think out loud. Sometimes, all they really want is a shoulder to lean on and a willing ear to listen. By being slow to speak, you are allowing the speaker to work out or solve problems themselves. Also, one must think before he/she speaks
  3. Keep the secret:
    People trust you with information because they believe that you will not gossip and spread slander. Keep their trust by keeping things private; between the two of you
  4. Be Attentive:
    Learn to actively listen. Let the speaker know that you are actually listening, although you are not speaking, by saying things like, "yeah, hmmm, I know, that's true, okay, that makes sense," and so forth. This shows that you are in tune with what they are saying and also following what they are saying
  5. Show Gratitude:
    Let the speaker know that you feel honored that they were able to open up to you. If nothing personal was said, than let the speaker know that you had a great time listening and that you learned a lot. In a society that forgets to show gratitude, a simple use of kind words, can make someone's day a little brighter. Showing kindness and appreciation will also help you with the interviewer
  6. Stay in Tune:
    Do not simply disappear in the middle of any conversation because your mind wandered. Whether you actually get up and walk away or let your mind wander elsewhere, it is just being plain rude. If you find that your attention span is small, actively repeat what is being said to you as the speaker is speaking

Monday, January 25, 2010

today's lesson. 26.1.2010

The purpose of today's lesson is to play with layers in Photoshop CS4. So, this is the result. :)

Monday, January 18, 2010

1st task :)



mine :)